Hexagon sizes and block counts
A hexagon with a flat side at the top and bottom. Top side is the number of blocks in the straight top row. Pick a size to open it in the generator.
Minecraft hexagon chart: common sizes
Octagons, triangles and other polygons
Change the number of sides in the generator to get any shape from a triangle to a 12-sided dodecagon. These are all 15 blocks wide:
- Octagon: the closest polygon to a circle that still has straight walls, popular for towers, fountains and rooms. An octagon is as tall as it is wide: 15 × 15, 21 × 21.
- Triangle: with a side down it makes a triangular floor plan; the same rows stood upright give the end wall of a pointed roof.
- Square turned corner down: a diamond, handy for paths, floor patterns and windows.
- 10 and 12 sides: almost round but with long straight edges, which are easier to build against than a circle.
How to make a hexagon in Minecraft
A perfect hexagon is not possible on a square grid, because its slanted sides would need half blocks. The generator picks the closest block shape, with every side equal to the others and both halves mirrored.
- Pick the widthWidth runs from corner to corner across the middle. The height follows from the shape: a 15-wide hexagon is 13 tall. Pick an odd width for a single middle block.
- Build the top and bottom sidesPlace row 1 from the build list: the straight top side. Mirror it for the bottom row so the two match.
- Step out along the slanted sidesThe rows step out until the middle, then back in. On a hexagon the slanted sides go about 2 down for every 1 across; copy the columns from each row instead of counting by eye.
- Check the cornersThe widest rows are the left and right corners. Count them from the build list; if both halves match the blue center line, the hexagon is even.
Flat top or pointy top?
Turn the shape with Side down or Corner down. A flat-top hexagon has a straight side at the top and bottom and corners on the left and right. Turn it and you get a pointy-top hexagon, with a corner at the top and bottom and straight sides left and right.
Pick the turn that puts a straight side where you need a wall to build against or a door: flat top for a gate in the front, pointy top for long straight walls on the sides. Turned hexagons are a little taller than they are wide, such as 15 × 17.
Hexagon bases, towers and houses
- Bases and houses: 15 × 13 fits a cosy house; 21 × 18 and up give room for a hall or a base. Put the door in the middle of a straight side.
- Towers: stack the same hexagon or octagon outline 10 to 30 blocks high. A thicker wall of 2 blocks looks solid on anything wider than 15.
- Honeycomb: hexagons that share a side tile with no gaps. Build one, then repeat it next to itself for bee farms, floors and walls.
- Roofs: for a hexagonal roof, build smaller hexagons on top of each other, each one 2 blocks narrower, like steps.
- Filled shapes: pick Filled for floors, platforms and patterns you dig into the ground.
Want it round instead? Use the circle generator for towers and the dome generator for the roof.
FAQ
How do you make a hexagon in Minecraft?
Set the width in the generator and leave the sides at 6. Build row 1, the straight top side, then copy the columns for each row from the build list until you reach the bottom side.
Can you make a perfect hexagon in Minecraft?
Not exactly. A true hexagon has slanted sides that would need half blocks. The closest shapes keep the right proportions, such as 15 × 13 or 21 × 18, with all six sides as equal as the grid allows.
What size hexagon should I build?
For a small room or tower, 9 × 8 or 11 × 10. For a house, 15 × 13. For a base or a hall, 21 × 18 to 31 × 27. Odd widths give a single middle block for the door.
How do you make an octagon in Minecraft?
Set the sides to 8. An octagon is as tall as it is wide, so a 15-wide octagon is 15 × 15. Build it row by row like the hexagon.
How do you make a triangle in Minecraft?
Set the sides to 3. With Side down you get a triangle with a flat bottom and a point at the top; Corner down turns it upside down.
Is there a WorldEdit command for a hexagon?
No. WorldEdit has no polygon shape command. You can mark corners with //sel poly and fill with //set, but the slanted sides come out uneven, so the blueprint or the .litematic file is easier.
Does it work on Bedrock?
Yes. The blueprint is the same on Java and Bedrock. The .litematic file needs the Litematica mod, which runs on Java.